- Label Type:
- Calibration Lables
- Label Reads:
- Calibration / Calibrated
- Pack Qty:
- Roll Of 250
- How To Order:
- Select the Required Size, Material and Quantity then click `Add To Basket`
Write-On - Calibration / Calibrated Green Labels On A Roll
As Low As £12.08
Write-On - Calibration / Calibrated Green Labels On A Roll
Item 1 of 2
Item 1 of 2
As Low As £12.08
Calibration Labels are an easy way of marking tools, equipment and meters to inform users that devices have been correctly tested as safe and suitable for purpose
- This is vital to ensure that readings on equipment are accurate to prevent product recalls or giving patients inaccurate results in healthcare environments
- Write-on labels are perfect for identifying instruments, tools, gauges and test equipment within a calibration system
- Help you to remain ISO 9001 accredited and comply with other quality systems
- Ideal for use low wear environments such as office blocks and general business premises
- Larger rolls provide better value for money and ensure supplies are always close to hand
- Permanent acrylic adhesive with a high initial tack, excellent adhesion and good low temperature performance on a wide variety of internal surfaces
- Easy to apply - labels come with their own adhesive
- Labels are suitable for internal use only
ISO 9001 & Calibration
When it comes to monitoring and measuring resources under ISO 9001 guidelines, there are certain guidelines that must be strictly adhered to for the most accurate results possible.
Measurement traceability is the process of validating the equipment that will be used to measure products and resources. This is an ISO requirement, and will give the organization confidence that all measurements are completely correct.
The specific standards for measurement traceability are outlined briefly in the list below, and explained more in detail throughout the rest of this section.
Instruments Used for Measurement:
- Calibrated in intervals before being used (following standards)
- Adjusted according to manufacturer’s instructions
- Able to identify calibration status
- Protected from adjustment that could affect results of measurement
- Protected from damages during moving, repairs, or storage
- Non-conforming devices are checked against a conforming device
- Calibrated by ISO certified providers
- Calibration and verification records kept and maintained
- Computer software confirmed and validated before use
- Computer software re-validated if needed
To begin, the instruments that are used for measuring resources must always be calibrated in intervals before being used, while following the specified standards in doing so. They must also be adjusted according to the instructions as provided by the manufacturer prior to being used to make accurate measurements. In a visible area on the outside of the machine, the operators must be able to clearly identify the status of calibration during these adjustments.
Source: https://www.iso-9001-checklist.co.uk/7.1-monitoring-and-measuring-resources-for-ISO-9001.htm
Gloss White Inkjet Paper
A white, high gloss, coated paper with a highly absorbent surface structure specifically designed for water-based ink jet printing. Gives excellent colour reproduction and bright, vivid colours. The face stock is made from FSC® certified paper.
Adhesive
A clear permanent acrylic pressure sensitive adhesive with a very high level of adhesion, combined with good tack and shear resistance. Also, good resistance to the effect of migration of phthalate plasticiser, UV and oxidisation. The adhesive is characterised by a high initial tack, excellent adhesion and good low temperature performance on a wide variety of substrates.
Approvals
The adhesive complies with the European food directives and legislations, FDA 175.105 and the German recommendations. XIV as published by BfR. BfR (Bundesinstitut für Risikobewertung) is the German Federal Institute for Risk Assesment. The adhesive side may stand in direct contact with dry, moist and such fatty foodstuffs which have a correction factor of at least 3 according to the Regulation (EU) No 10/2011.
Shelf Life
Two years under storage conditions as defined by Premier Coating & Converters Ltd 20° - 28° C and 40 – 60% RH.
Surfaces and Environments
- Card / Cardboard (Fluted/Coated/Uncoated)
- Ceramics (Glazed)
- Clothing (Coarse Weave)
- Glass
- Leather
- Metal (Painted/Powder Coated)
- Packaging (Foam, Polystyrene & Sponge)
- Paper (Coated/Uncoated)
- Plastic (Rigid/Smooth)
- Resin
- Rubber (Uncoated)
- Shell
- Wood (PAR Finish/Polished)
Performance Data
- Temperature: Ambient (30ºC - 25ºC)
- Locations: Internal (Not Weatherproof)
- Initial Tack: 16 N/25mm / FINAT FTM 9 Glass
- Peel Adhesion: 90°: 9 N/25mm / FINAT FTM 1
- Min. Application Temp.: 0° C
- Service Temperature: -20° C to 80° C
- Shelf Life: Two years under storage conditions as defined by Premier Coating & Converters Ltd 20° - 28° C and 40 – 60% RH
Free Delivery On All Orders!*
Prices excludes VAT at 20%
